Why is FM-200 the Best Fire Suppression System?

It has become imperative for every commercial property to ensure its campus is well-equipped with firefighting and suppression systems. These help in curbing down the fire and prevent its further spread. Fire, when not prevented or extinguished on time, can cause property damage and even prove fatal for people inside the property.

Every property is equipped with high-level and excellently performing fire suppression systems. There are several such products available in the market, but the one that has gained a lot of popularity in recent times is the FM 200 system Dubai. In this article, we have explained the working of this system, followed by the incredible benefits people can have after its installation.

How does the FM 200 fire suppression system work?

The FM 200 fire suppression system is known to be the cleanest of all, thanks to its chemical. This is mainly used in areas where sensitive electronic elements are present. Once the smoke detectors detect any smoke in the room, the fire suppression system gets activated. It sprays the liquid directly over explosive materials

It doesn’t leave any oil or water residue that can cause further damage to the electronic components present in the area. It only requires about 10 seconds to extinguish the fire, which is considered to be one of the fastest fire suppression systems. The FM 200 chemical is stored in a cylinder under high pressure. This pressure is achieved using nitrogen gas that does not react with the chemical due to its inert nature.

Due to this arrangement, it consumes much less space than any other fire suppression system. The significant areas where it is used are mainly the business areas involving the use of electronic equipment units like the server room, workplaces, commercial units, and so on.

What are the benefits of the FM-200 fire suppression system?

To understand the excellence of the FM 200 system in Dubai, you must know its benefits. In this section, we have described the primary reasons why it is preferred over other fire suppression systems.

Faster suppression system

FM 200 system is said to be the fastest fire suppression system. It needs only 10 seconds to extinguish the fire. Besides, the system gets activated once smoke detectors in the area detect the presence of any smoke or fire in the concerned area. Due to its excellent working, it is known to be the most efficient fire suppression system.

FM 200 System in Dubai

Clean and leaves no residue

Another reason to install the FM 200 fire suppression system is its cleanliness. It does not leave any residue over the surfaces where the chemical is sprayed. Therefore, everything will remain clean, and there won’t be any hassle for cleaning the surfaces or anything else.

Safer and secure

The FM 200 fire suppression system is the most secure and safest. It does not destroy electronic devices after the chemical is sprayed. Furthermore, the pressure is maintained due to nitrogen gas, which is completely inert and does not cause any form of chemical contamination.

Environment-friendly

FM 200 chemical is entirely environment-friendly. It does not cause harm to the environment or humans. As a result, it is preferred so much in several business and commercial areas.

Conclusion

The FM 200 system in Dubai is considered to be the safest, cleanest, and the most efficient system that can be used in most business and commercial areas. It needs unique installation methods to ensure the chemical is sprayed right over the area where the smoke or fire is detected.

How to choose the right fire alarm system for your building?

Fire can cause perils that can cause numerous casualties without any warning. We are not just talking about forest fires that can burn down 30% of the Earth’s surface within a couple of hours only. Instead, we are talking about man-made fires that can risk people’s lives. Although most man-made structures have systems to extinguish a fire or combat it in any other way, these methods apply only after the flames spread out in multiple directions.

How can you know if a fire is about to break out in a complex beforehand?

You know the disease, the cure, and the treatment process. However, you do not have any idea about the precautions. Therefore, you should install a fire alarm system that can alert you if any possible fire source is present within a particular area or not. It will notify you before the disaster, and you can prevent the flames from breaking out in a larger area. The only thing you need to do is get the best fire alarm system from the market.

Here are some tips on how you can get the best product from the market without any loss in investment.

Understand various types of fire alarms

The first thing you should know is the different fire alarm types. Without having this knowledge, it’s not possible to select the best system and get it installed at the building. Other systems have different properties and features. They do not function similarly and might not meet your requirements head-on. You should go through the product details before adding them to your list. This way choosing the right fire alarm network system becomes much more crucial.

Check if the sensor is receptive or not

While looking through the fire alarm systems in Dubai, always consider products with high responsiveness. If there is a considerable time gap between the sensor’s activity and the alarm sound, the fire can quickly spread to other portions, especially if the area is narrow. Therefore, get a fire alarm system with high-quality sensors and optimized response time.

Look for wireless or Bluetooth alarm systems

It is better to look for wireless or Bluetooth fire alarm systems as they are easy to operate and can be accessed remotely. In addition, the wireless alarm system works on the technology of IoT, where you can control other appliances from your phone with no physical connection. Similarly, if you get the Bluetooth alarm system, you can pair it with your device’s Bluetooth for seamless connection and easy operability.

Fire Alarm System

Consider a proper budget

Maintain a strict budget, no matter what, because a fire alarm system in Dubai might cost you more than $50. It is indeed a high costly; therefore, setting a fixed limit is important.

Check the product quality and performance

Before adding any product to your cart, you should pay special attention to the product quality and performance. For example, if the alarm you chose doesn’t have an alarm system with good sound or lacks the options for customizing alarm tunes, you won’t be able to use it for maximum security and protection.

Similarly, it should connect with other devices to establish a more secure network. For example, you should be able to connect the fire alarm system with the CCTV network to check the source of fire through the cameras.

Conclusion

Since you know the top ways to choose the best fire alarm system in Dubai, your task will be to go through the list of options you have. Ensure the scrutiny is done thoroughly without compromising the quality and performance of the product. In addition, you should also check if your chosen fire alarm ensures 90% maximum security and protection or not. To get the best Fire Alarm Systems, visit Resco and thrive on quality and budget. Our experts are always there to help you.

5 tips for installing emergency exit lights

Whether it is a corporate building or a residential one, every architecture should have appropriate measures during emergencies. For example, a panic bar is installed inside corporate buildings with large block gates to help people push open the door if it gets blocked during a fire. Similarly, stairs are strategically placed between the apartments on each floor in a residential building so everyone can quickly assemble at the same location.

When the constructors and builders consider your safety the top priority, you should also take responsibility and ensure everything is in place. Studies have shown that many buildings and factories do not have directions about the emergency exits. As a result, people don’t know which site is safer for them, resulting in chaos. That’s why the government has issued several protocols, out of which installation of emergency exit lights is more important.

This article will discuss the easiest steps to follow for emergency light installation at the exit points.

Choose a location with 100% visibility

You need to choose a location for installing the emergency exit light that is 100% visible from almost all angles. If it is a pillar you use for mounting, ensure people rushing towards it can see the sign and the direction from at least a couple of meters away. Similarly, if you want to install the light right at the top of the exit door, place it right in the middle to ensure people coming from any direction can see it without any obstruction. Permanently mount the light high enough so it can easily reach the line of view..  

Ensure continuous electrical supply to the exit sign

You should establish an electrical network that supplies continuous power to the emergency exit lights. Failure to do so will lead to several consequences, most of which will be fatal. If the emergency light is not on due to problems in the electrical connection or scheduled power supply mechanism, no one will be able to know if the direction is right or wrong. These assumptions can easily lead to further mishaps and accidents within the building. Therefore, always use a backup source for power if there is no electricity in the first place.

Follow the Fire Protection codes and protocols

While installing the emergency exit light, you should follow all the Fire Protection codes and protocols. You can visit your state’s official website and check what limitations and restrictions they have put on this device. Following them will give you an idea about the proper installation of emergency exit lights in no time.

Take help from a professional

Do not hesitate to take help from a professional because they are much more proficient in installing emergency exit lights than us. They know the right place where the installation will suffice the needs and ensure maximum visibility. They also ensure the electrical connection formed is solid and robust, capable of providing power supply for a long.

Emergency Exit Lights

Placement should be correct according to the marks

The placement of the emergency exit light should align with the mark and the direction it is pointing to. If you want your employees to go to the left but the emergency light mark points towards the right, it will lead to huge confusion. Therefore, be very sure about the marks and directions they point to before installing the lights.

Conclusion

Now that you know the best ideas for installing emergency exit lights, it’s time to make a plan to implement them. Delays will only increase the chances of mishaps and accidents because these are inevitable. So, having a safety plan beforehand sounds excellent, especially in commercial buildings. Use the expert advice and best quality safety equipment from Resco to keep your surroundings safe! Visit us today to buy safety and security solutions.

How Does an Addressable Fire Alarm System Work?

What is an Addressable Fire Alarm System?

An Addressable Fire Alarm System (AFAS) is a fire alarm system fully equipped with sensors and transmitters. These sensors are installed throughout the building, such as in stairwells, corridors, and elevators. When smoke or other hazardous conditions are detected by the sensor(s), an alarm signal is sent to the central office, where personnel can simultaneously monitor the status of all alarms throughout the building.

Addressable fire alarm systems use transmitters to transmit signals to higher-level control panels. These transmitters are typically located at triplexes or above so they can monitor multiple buildings simultaneously. Addressable transmitters allow fire dispatchers to identify individual buildings by their address rather than location. This means that if one building has an alarm, it will not affect other buildings nearby.

Top Benefits of Addressable Fire Alarms

The benefits of addressable fire alarms are vast. They help to protect your home from fires and other disasters, which is why they should be in every home. Here are five of the top benefits:

1. Automatic warning during emergency: This means you will receive an automated phone call or text message telling you there has been some type of emergency at your home.

2. Added security for your family and friends. If you have friends or family members who live with you, they may not be able to get into their homes if there is a fire. With an addressable fire alarm, they will be notified when there is a problem so they can go back inside safely and quickly.

3. Improved communication between all members of the household. When everyone knows what is going on at all times, emergencies can be handled with much more efficiency.

4. More accurate detection of fires and other emergencies. A properly installed fire alarm system will detect the smallest flame at anywhere from 20 to 60 feet away and sound an alert when it detects smoke or fire. This allows you to get out of the building faster and safer than if you were relying solely on your senses alone.

5. Reduced insurance premiums for homeowners who have fire alarms in their homes as opposed to those who don’t because insurers need proof that such alarms are installed before they will insure your home for claims related to fire damage (such as smoke detectors).

Working on an Addressable Fire Alarm System.  

Addressable Fire Alarm System

An addressable fire alarm system can be installed in various buildings. It is a system that detects fire and smoke at any point within the building. The installation of an addressable fire alarm system requires the use of special equipment connected to the existing electrical power supply. In addition, different types of systems are available in the market, each with its advantages and disadvantages.

The working principle of an addressable fire alarm system is based on the fact that every object emits a certain type of electromagnetic radiation, which can be detected by electronic equipment installed on the premises or in a central monitoring station. The equipment then displays information about whether there is a fire or smoke somewhere in any part of the building.

The system consists of two parts: the first is an alarm control panel, which has an interface for connecting with other systems and can be used to manually control doors, lights, and other devices; the second is an automation system that manages these functions automatically.

The alarm control panel must be connected to an easy-to-use display screen so that you can view all relevant information at once. You will also need a remote control unit that allows you to adjust without going through the whole building yourself.

The automation system uses sensors such as gas and smoke detectors in various locations throughout the property to detect any fires or smoke signals before they reach your home or office – this way, you can avoid costly damage caused by fires or carbon monoxide poisoning!

The Bottom Line

An addressable fire alarm system is vital for the quick and efficient evacuation of buildings. This system can improve your business’s fire safety rating, thereby avoiding potential fines. If you are interested in learning more about how an addressable fire alarm system works, look at our guide to residential (detail) and commercial (overview) addressable systems. If you’re in need to install a fire alarm system with high-tech features, consider Resco as your best companion. We provide safety and security solutions that keep you and your loved ones safe and sound.

Types of Emergency Lighting Systems and Maintenance

Emergency lighting systems are designed to illuminate areas during power outages, natural disasters, or other emergencies. These systems use multiple light sources, such as candles, flashlights, lamps, and battery-operated equipment, to give you enough light to see your way around and maintain safety. Some emergency lighting systems use battery-operated lighting that can be recharged by hand crank or solar power generators. The type of lighting system you choose depends on several factors, including the volume of electricity in your house, the price tag, and your budget.

The emergency lighting system is broadly divided into two categories: Emergency Escape Lighting and Standby Lighting.

An Introduction to Emergency Escape Lighting

This lighting system enables the user to quickly escape a dangerous situation, such as an intruder or fire. It can be installed in an exit corridor or hallway, stairwell, or elevator shaft. The emergency lights are usually mounted on the ceiling, so they project downward and provide illumination for people who are exiting the building at night.

These systems are fairly easy to install and maintain. They also require no special wiring or additional hardware, just a few essential components supplied by the manufacturer. The light bulbs used in these systems should be high-intensity discharge (HID) lamps or compact fluorescent lamps (CFL) that emit a maximum of 500 lumens per watt. HID lamps provide a brighter light than CFLs while still being energy efficient, lasting up to three times longer than CFLs before replacement is required.

An Introduction to Standby Lighting

Standby lighting is the term used to describe any form of lighting that is designed to function when power is out. Standby lights are often used in emergencies, such as after a power outage or during a power failure.

Standby lighting can be used alone or in conjunction with other forms of emergency lighting. The most common types of standby systems are battery-powered or generator-powered. A battery-powered system will require no additional equipment or wiring, while a generator-powered system requires an electrical outlet and additional equipment (such as a generator).

Key Difference Between Emergency Escape Lighting & Standby Lighting.  

Emergency Lighting System

The difference between emergency escape lighting and standby lighting is that the first is a temporary solution to your problem, while the latter is a permanent solution. The main difference between these two types of lights lies in their purpose. Emergency lights are designed to help people get out of a building in an emergency, while standby lights are intended to help keep your home lit at night.

Emergency Escape Lighting: Emergency lights are used primarily during power failures or other emergencies when finding your way out of a building is necessary. They can be found on the stairways of high-rise buildings, parking garages, and elevators. They are usually activated by pressing any part of the door frame or nearby wall, and they come with a light source that emits bright light for up to 10 seconds before going off automatically.

Standby Lights: Standby lights refer to those installed in homes or other buildings for illumination purposes only. They do not require electricity to operate but instead rely on the presence of electricity from the grid itself (or from solar power). Standby lights can be powered by batteries or solar cells that convert sunlight into energy through photovoltaic technology (PV).

Emergency Escape Lighting Vs., Standby Lights- Which One To Choose?

Emergency Lighting System

Emergency escape lighting is a single light placed on a wall or ceiling to illuminate an exit route. It is located directly above the door and usually provides enough light to help somebody find their way to safety in an emergency.

Standby lights are two or more lights that are turned on when needed. They can be installed in areas with no emergency escapes and will provide illumination for an exit route if needed.

Emergency escape lighting can be used as either a stand-alone system or as part of a larger lighting package that includes standby lights. Suppose you install both types of lighting in the same area. In that case, you’ll have three systems working together to provide illumination for your entire facility: one for an emergency, one for general illumination, and one for auxiliary use (such as task lighting).

Let’s Wind Up

Many people are taking a more proactive approach and contacting qualified electricians to assess their home’s electrical system. Many of these professionals will help the homeowner by advising on improving their electrical system. Furthermore, they will often offer service guarantees. While doing it on your own is not recommended, there are ways for homeowners to check out and make any necessary electrical adjustments. To ensure that your home is ready for any emergency, contact a professional at Resco who can assess and handle your specific needs.

Shield Pipe and Fitting in Fire Sprinkler Systems: Use and Care

Fire protection systems are the most important system in any building. Installing a Sprinkler System with Shield Pipe and Fittings helps to ensure that the water will flow and spray properly from the system. Shield pipes and Fittings are growing in popularity for use in Fire Sprinkler Systems in residential and others. These components offer faster and safer assembly than cheap metallic alternatives because installers do not require flame or heavy equipment to join components.

Here are some guidelines to maintain the Fire Sprinkler System:

Check non-electronic control standards: Building owners should check weekly to make sure non-electric control valves are open. If the valves are closed and there is a fire, it is responsible for not having a sprinkler system. So, when on fire, nonelectric sprinkler control valves must be open to distribute water. It is also better to operate the Fire Sprinkler System with shield pipe and Fittings.

.  

Shield Pipe and Fittings

Remove the cover from the sprinkler head: You can face a temporary block of water flow due to the lay of dirt collected by sprinkler heads over time. Particularly risky for coatings are sprinklers that are located in places where grease accumulates, such as in the kitchen. Covers from the sprinkler head can be washed off with a non-radioactive, non-corrosive solution.

Check the water pressure:  Sprinklers require a sufficient amount of water pressure to spray water throughout a room. As a result, it is a good idea to check the water pressure through a fire service professional or an experienced plumber. On other hand, you can also use Shield pipe and Fittings while using a Sprinkler System to avoid any problems. If the other water fixtures in your building get enough water pressure, so will the sprinkler system.

Shield Pipe and Fittings

How do the Fire Sprinkles work?

When the heat of the fire activates a fire sprinkler, water is released from the piping system through pressure. This is how fire sprinklers work. The Fire Sprinkler system is designed to reduce the danger of accidents. So, let’s talk about How to make the Fire Sprinkles work.

  • The sprinkler heads work independently. The fire can be completely extinguished after only one or two sprinklers are activated in most cases. This limits the water damage to a small area from where the fire started. Also, fire sprinklers extinguish fires with about six times less water than fire hoses. Their quick action is less harmful to your property than a fire department inspection.
  • When heat activates a sprinkler head, a valve opens, allowing water to flow through the pipe system. Each sprinkler head is connected to a pipe that connects to a reliable water source outside the building. It is important to apply pressure to the water in the fire sprinkler system. This allows the water to be sprayed outwards at pressure to extinguish the fire more thoroughly and prevent it from reigniting.

Conclusion

As we mentioned above, installing a Fire Sprinkler is a need for every household. This will help to reduce the risk of accidents. Fire Sprinkler with Shield Pipe and Fittings make things easier to monitor. Contact Resco today, and install the best fire sprinkler systems in your place through the most-renowned solutions company. Visit our website, or e-mail us at riyas@resco.ae / info@resco.ae

Benefits of a Fire Alarm System: This Is Why You Need One

Having a Fire Alarm will help you to avoid accidents.

A Fire alarm system is a perfect solution to avoid unwanted danger and accidents. It will help you to detect the smoke and avoid any calamity. Having a fire alarm on your property can reduce the chances of major damage. You can choose the Fire Alarm System Dubai for your home as it is a nifty tool that you will definitely need in a time of emergency.

Here are some benefits of a Fire Alarm System:

Early detection of fire: The best part of having a fire alarm system is that it can easily detect any fire or smoke. The earlier you will detect the fire, the faster you can inform the firefighters. The modern Fire Alarm System Dubai also can automatically call emergency services. Therefore, it will reduce the time that takes for key contacts to typically reach the fire brigade’s site.

.  

Fire Alarm System Dubai

Noise makes you attentive: Indeed, our bodies react as much to noise as they do to smell during sleep. So, it can be tough to detect a fire while sleeping but having a Fire Alarm System Dubai can help you to find the danger. This fire alarm noise can react to your senses and you will get an easy response.

Secure your house: Fire alarm systems secure your life. It will work day and night to secure the perimeters so that you can work on other things without worry.

Fire alarms are handy to use:  While using a fire alarm system, you will find how handy it is to use. It is a hassle-free job to do that brings so many benefits.

Fire alarms provide insurance: The fire alarm system can be your savior as it can alert you.  Therefore, many homeowners’ policies offer exciting discounts for customers who have installed it in their homes.

Fire Alarms help to avoid suffocation due to smoke: Smoke is the leading cause of death in respiratory fires. The inability to know if a fire has started can lead to suffocation during breathing, which can lead to fatal results. In most cases, the accident happened when the homeowners fell asleep. So, having a Fire Alarm System in Dubai reduces the level of threat.

Installing a Fire Alarm System gives you comfort: Installing a fire alarm system gives you peace of mind that someone is watching over your home or office for any fire-related hazards. So, even if no one is there, you don’t have to worry about any disasters.

Fire Alarm System Dubai

Conclusion

Having a Fire System Alarm is inherent in your household or office. This smoke detector will help you detect the dangers and save you from your loss. So, this is why we need to install Fire Alarm System Dubai to avoid unwanted accidents. To find a suitable fire alarm system for your home, contact Resco and get help from experts in the industry.

The importance of emergency exit lights in fire safety system

One of the most important precautions in terms of environmental safety relates to fire which is why emergency exit lights are worth deploying in the existing framework.

Law of emergency exit lighting

It states that non-domestic structures should cater to a safe environment including situations of the main power cut. It thus mandates the provision of emergency exit lights as an adequate safety feature.

Why is it necessary to deploy emergency exit lighting?

In case of failure of the power supply, emergency exit lighting provides a sufficient source of light immediately and automatically so that people can move out of any building at ease and with confidence. Generally, when a fire breaks out in an enclosed space, darkness prevails which then triggers fear, panic, and confusion among others. During such events, the likelihood of getting injured is more, inviting further obstructions in the rescue work. However, emergency exit lights lit up the possible evacuation routes whether lobbies, staircases, key boxes, or places having fire extinguishers to make the evacuation procedure fast during alarming circumstances.

It’s critical to implement a well-designed and properly planned emergency exit lighting system in advance to assist in the safe evacuation.  

Emergency exit lights in dubai, uae

How to use it correctly?

Following a load-shedding, the emergency exit lights must be put on for an hour. On the other hand, for structures with sleeping accommodation, the turn-on time goes up to 3 hours. 

Now, you can get the best Emergency exit lights in Dubai from RESCO and put the fear of fire to rest.

Types of Emergency exit lights

Emergency exit lights are of different types. The most conventional ones are the internal and external bulkhead fittings connected to the main electrical wire. They can be operational for up to 3 hours without the main power and be recharged to restore the source of power.

Illuminated exit indications are another kind of emergency exit light that are used to demarcate the routes for the exit.

Fluorescent marker tape, floor disc, and paint are used to signal the changes in the level of structures such as ups and downs. It also works on the staircases to guide people in smoky conditions and those with partial eyesight.

Maintained emergency lights

They function with the help of a switch and can be left on throughout or used in case of load shedding. They are used in public venues like movie halls to prevent pitch darkness backed with the capacity to operate during a power cut.

Non-maintained emergency lights

It functions only during power cuts, often supported by a battery that draws power by self-charging. Any emergency lighting needs to be tested daily to abide by the power and other safety standards.

Emergency exit lights in dubai, uae

Where do you need emergency exit lights?

Every monument has an individual requirement of emergency exit lights. Also, on the other hand, the setup demands can vary within a single building. That being said, some parts might have a flow of natural light while others might need to be artificially lit up. Considering a structure that functions at night time, it would require emergency exit lights at every point. Otherwise, if there is a sufficient, consistent and broad source of a street light that everyone is familiar with, emergency exit lights won’t be needed in such places.

Ideally, emergency exit lights must be placed at

  • Exit panels
  • Exit routes
  • Intersection of corridors
  • Individual exit points and outside routes
  • Emergency exit signs
  • Staircases and junctures of ups and downs 
  • Close to fire fighting equipment
  • Rooms without windows
  • Washrooms of greater size than 8sq. m
  • Fire alarm call junctures
  • Junctures where any machinery needs to be turned off during an emergency
  • Elevators
  • Areas that are bigger than 60 sq.m.

It’s important to cast ample light in such places rather than providing separate lights at each place.

RESCO, a reputed label in Dubai and across the UAE is known for providing the best fire safety services. Being qualified and experienced installers of emergency lights, exit signs, and panic doors, the company offers both discrete and Central Battery systems along with the provision of compliance checks to meet the legal standards. Their products are driven by varying power capacity, autonomy, and IP grade besides being equipped with the latest LED technology to cut down on cost and optimize energy levels during operation. Moreover, they come fitted with plexiglass diffusers to spread light over a larger area, especially in misty conditions. Such lights are easy to install and can be hung from the ceiling or walls whose brightness can be adjusted from time to time.

How Fire Alarm System Works

Fire protection is one of the most vital components of a building, and fire alarms are a part of that system. A fire alarm system in Dubai, UAE is a mandatory part of fire protection. These small units alarm the inhabitants of the building in case of a fire and give them time to get to safety. Although these units are a part of our daily lives, many people don’t understand the workings of a fire alarm system and how they can choose the perfect ones for their buildings. In this guide, we will look at the working of a fire alarm system and why it is a must-have component in both your commercial and residential buildings.

Fire Alarm System in Dubai, UAE

The Role of A Fire Alarm System

The fire alarm system in Dubai, UAE belongs to a family of fire equipment, and it is used for fire protection. This system includes several components and is used for the protection and containment of fires.

The system is designed with several sensors (these are used for both smoke and fire detection), automated extinguishing agents (such as sprinkler systems and smoke detection systems). You will also find units that include roller shutter control and these units are often integrated as extensions to a fire alarm system.

The fire alarm system in Dubai, UAE is activated in the case of an emergency. After the alarm is triggered, the nearest fire department is also alarmed to ensure maximum fire containment. You will also find systems in the market that alarm the residents of the house via phone and SMS in case of an emergency.

Parts of a Fire Alarm System

Before we get to the working of an alarm system, it is essential to know about the parts. The fire alarm system in Dubai, UAE includes several different parts and components where each has a unique function. Knowing about these parts firsthand will help you understand the workings of a fire alarm system better. The following are the five primary parts that are included in every fire alarm system:

  • Initiating Devices – These are the components of the alarm systems that are used to detect smoke or fire. These devices include smoke and heat detectors, water flow sensors, and pull stations.
  • Indicating Appliances – These components are used to sound the alarm and alert people about the fire hazard. The indicating appliances include horns, chimes, bells, etc. Indicating appliances are designed to be loud so people are altered at once and leave the premises at the earliest. Some units also come with strobe lights to alert people with hearing aids.
  • Fire Alarm Panel – This is the user interface of the fire alarm system and it is used for central monitoring. The alarm system is controlled using the fire alarm panel. This panel includes a display that shows the current state of the fire alarm system in Dubai, UAE.The panel allows the users to troubleshoot the alarm systems and reset them whenever necessary.
  • Power Supplies – This is the backup power that is used to power the fire alarm system in case of a power loss. The batteries can either be integrated into the control panel or stored in a separate enclosure. These batteries will start powering the alarm system in case of a power failure and work for 24 hours.
  • Auxiliary Devices – These are additional devices that could be added to the fire alarm system in Dubai, UAE to ensure maximum fire protection in any facility or commercial building. Some examples of auxiliary devices include visual LED indicators, fire doors, alarm silence switches, etc.

How is the Fire Detected?

The initiating devices within the fire alarm system detect smoke or fire. The fire control panel is connected to the initiating devices via wire circuits. These wire circuits allow the control panel to monitor the state of the initiating devices and identify whether they are in normal or alarm modes. The control panel will then show these readings on the display panel. When the fire starts, the smoke or heat will trigger the initiating devices, this will alert the fire alarm system of the fire and put it in the alarm mode.

Fire Alarm System in Dubai, UAE

What Happens After The Alarm is Activated?

  • One, the indicating appliances will start sounding the alarm, this will notify everyone in the building about the danger.
  • Second, the system will direct a call to the monitoring company alerting them about the fire as well.

Final Words

A fire alarm system in Dubai, UAE is an essential part of your building. This system protects you from fire and ensures maximum fire security. Installing them in your building will be a protective measure and increase the security of your building. If you are looking for a trusted fire alarm system in Dubai, UAE,have a look at RESCO. We offer a variety of fire safety solutions to choose from and assist with installation as well. Browse our collection of the latest technology, or get in touch with our expert team to discuss your specific requirements at +971 4 2654155.

Why Fire Alarm Systems Are Necessary for Your Building

A fire alarm system is pivotal in helping you minimize the fire risk. Installing a fire alarm system can save lives and alert people about the fire before it gets out of hand. There are many fire safety components, and each of them plays a specific role in minimizing the risk of fire, but you can’t underestimate the role of a fire alarm system. Merely installing an alarm system is not enough. You must maintain it to ensure optimal working. You can enlist the services of your installer, or you can hire a different company to help keep your fire alarm system up to the code.

A fire alarm system consists of several components that work together to alert you about a fire. Over the years technology has advanced and this has led to the production of more sophisticated fire management systems. If you are thinking about the importance of fire alarm systems and whether you should install them in your building, we are here to help. Below we have discussed some of the most notable reasons that highlight the importance of fire alarm systems in your building. Read on to gather more information and make an informed choice.

The Purpose of a Fire Alarm System

The primary purpose of a fire alarm system is to notify people in case of a fire. A fire alarm system is designed to identify even the smallest fires and alert the people about the threat. This allows inhabitants of the building to get out of the building in time. Although the fire alarm systems play a significant role in life safety by notifying people about the fire, they also communicate with local fire departments for a faster response time. By notifying the fire department in time, alarm systems help you minimize the damage and help control fire in time.

Does Your Building Need One?

Several factors must be taken into account before you determine if you need a fire alarm system. The first factor is the building life safety codes that are mandated by the government. These codes depend on the type of occupancy. Thus, the safety codes will vary for industrial, commercial, and residential areas.

The classification of occupancy will help you decide whether you should install a fire alarm system in your building. Another factor that plays a pivotal role in this decision is the installation of a fire sprinkler system. In some areas, installing a fire alarm system is not mandatory if you already have a fire sprinkler system in place.

Thus, before you go forward with the installation process, you must consult with an engineer, contractor, or fire protection expert. They will help clear your doubts, and guide you towards the best fire alarm system in Dubai, UAE as well.

You may be required to install a fire alarm system in industrial and commercial buildings, but the same might not be mandatory for residential buildings. However, if you feel the need for an alarm system, you can install it in your building for an extra layer of protection.

Reasons to Install Fire Alarm Systems

Fire safety and prevention must not be overlooked. Even the slightest ignorance can not only lead to property damage but also put people’s lives at risk. In addition to fire sprinklers, fire alarms are a great method of fire prevention. By alerting everyone in the building these alarms help save lots of lives. Some of the most notable reasons for installing a fire alarm system in Dubai, UAE includes:

  • Saving lives- This is one of the primary benefits of installing fire alarm systems. By adding a fire alarm into your fire protection system you make the building safer for inhabitants. A combination of a fire alarm and a sprinkler system will work together to alert people and control the fire as well. Thus, the people will have ample time to get out of the building safely. Evacuation will become much easier and the likelihood of casualties will decrease significantly.
  • Prevention of property loss- Although sirens and alarms cannot put out the fire, they can alert people in the initial stages. Thus, people will be able to call the fire department and control the fire before it gets out of hand. Several fire alarm systems in Dubai, UAE come with a sensor that automatically alerts the emergency responders. This allows them to prevent the fire from spreading and minimize your property loss as well.
  • Shorten recovery time- Less damage will also reduce the downtime sustained by the organization. Thus, you will face fewer losses by installing fire alarm systems. Also, if the fire is managed quickly due to these alarms, you will be able to return to normal life in no time.
  • Beneficial in insurance discounts- Some insurance carriers provide discounts to building owners on their insurance policies if they have fire alarms installed in their building. While some insurance providers will only give you a policy when you have a complete fire protection system including fire alarms in place.
  • Keep your building fire code compliant- If you don’t want to sustain fines and other unnecessary fees due to compliance issues, installing a fire alarm system will be a smart decision. These alarms will keep you compliant with the fire code and help you save fines and other fees.

Regular Maintenance and Testing is Important Too

Installing a fire alarm system is a step in the right direction. However, your work does not end there. The fire alarm system in Dubai, UAE must be in working condition. Thus, you must pay attention to the repairs and maintenance of your fire alarm system. Choosing a reliable partner for maintenance will assist you in keeping your systems in the best condition and staying compliant with the fire code. An experienced service provider will be aware of all necessary repairs. They will help you keep your systems up-to-code, and increase the lifespan of your fire protection system as well.

Final Words

A fire alarm system is a part of a fire safety system, and it can be a beneficial addition to your building. These alarms can alert people and help them get to safety in case of an emergency. Choosing an experienced supplier is also essential for the proper installation of this system. RESCO is one of the leading names that supply a wide variety of fire alarm systems in Dubai, UAE. We offer several other fire protection and safety systems to choose from. Browse our website to look at our collection of products, or get in touch with our support team at +971 4 2654155.